Help provide higher hold current inthe smaller footprint, improve productreliability and quality, enhance high-temperature performance in a widerange of circuit designs.

Item	0603 SMD Fuse
Standard	UL
Blow Type	slow blow
Body Material	ceramic
Fusing Material	alloy
Voltage Rating	32V 63V dc
Current Rating	0.25A 0.375A 0.5A 0.75A 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A 6A 7A 8A
Mounting Type	Surface Mount
Size	1.6x0.82x0.45 mm
Package	5000pcs per reel

Product Features

Tiny Structure
Rapid interruption of excessive current
Compatible with reflow and wave solder
Ceramic and glass construction
One time positive disconnect
Lead free and Halogen free material
Tape and Reel for automatic SMT placement

Applications

USB charger
DVD players
Laptops
Portable electronics
Digital cameras
Game syste ms
Cell phones
LCDmonitors
Printers
Scanners

Operating Temperature: -55℃ to +125℃ (Consider de-rating)

Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.

A:Soldering pot temperature: 260℃ Max; Solder dwell time: <5s (Wave Soldering)

B:Solder Iron Temperature: 350±5℃, heating time: 1~2s. (Hand Soldering)

Specification

DC Interrupting Rating (Measured at rate d voltage, time constant of less than 50 microseconds, battery source)

DC Cold Resistance are measured at<10% of rated current in ambient temperature of 25degrees

Typical Pre-arching l2t are measured at 10ln Current

For fuse below 1A, the color of glass coating is Blue; for 1A and above it' s Green

Drawing of the 0603 SMD fuse

Blowing time 0603 slow blow smd fuses

1206 & 1032 SMD fuses:

SMD fuses production machine

Standard Package:

1,500 pcs per reel

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

Will the fuse need to accessible for replacement?
How often will the fuse need to be replaced?
Should the end customer of the appliance have access to change the fuse?
Should the fuse only be accessible from outside the appliance?
How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
UL-standard no. 512.

Test Equipment

Company warehouse

FAQ

Q: Are you trading company or manufacturer ?

A: We are a fuse product factory.

Q: How long is your delivery time?

A: Generally it is 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: 100% in advance, T/T.

Product Tags: