6x30 AGC Glass Tube Fuse 32Vdc 1/4" X 1-1/4" AGC Fuse 32V 1A 2A 3A 4A 5A 6A 7A 8A 10A 15A 20A 25A 30A
Description
3AG size, type AGC, 0.125 A to 50 A, 1/4 inch diameter (6.3mm) by 11⁄4 inch (31.8mm) long
| Item | AGC Fuse, 32V 3AG glass tube fuse |
| Standard | SAE J554 |
| Blow Type | fast |
| Body Material | glass |
| Fusing Material | zinc alloy |
| Cap Material | nickel plated brass |
| Voltage Rating | 32VDC |
| Current Rating | 1A 2A 3A 4A 5A 6A 7A 8A 10A 15A 20A 25A 30A |
| Mounting Type | cartridge or axial leaded |
| Applications | Automotive |
Operating Temperature: -55℃ to +125℃ (Consider de-rating)
Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.
Recommended Soldering Parameters: Soldering pot temperature: 260℃ Max; Solder dwell time: 2∼5s
Resistance to Soldering Heat: 260℃, 10s. (Wave); 350℃, 5s. (Soldering iron)
Solderability: 260℃, ≤ 3s. (Wave); 350±10℃, ≤ 3s. (Soldering iron)
Automotive fuses are a class of fuses used to protect the wiring and electrical equipment for vehicles.
They are generally rated for circuits no higher than 32 volts direct current, but some types are rated for 42-volt electrical systems.
They are occasionally used in non-automotive electrical products.
Specification
| Time vs Current Characteristics |
| Rated current | 110% | 135% | 200% |
| Blow Time | >4h | <1h | <10s
|
For high currents
For lower currents
North-American built automobiles up to at least 1986 had electrical systems protected by cylindrical glass cartridge fuses rated 32 volts DC and current ratings from 4 amperes to 30 amperes. These are known as "SFE" fuses, as they were designed by the Society of Fuse Engineers to prevent the insertion of a grossly inadequate or unsafe fuse into the vehicle's fuse panel. These SFE fuses all have a 1⁄4 inch diameter, and the length varies according to the rating of the fuse.
A 4 A SFE 4 fuse is 5⁄8 inch long (the same dimension as an AGA fuse of any rating),
a 6 A SFE 6 fuse is 3⁄4 inch long,
a 7.5 A SFE 7.5 fuse is 7⁄8 inch long (same as an AGW fuse of any rating),
a 9 A SFE 9 fuse is 7⁄8 inch long (same as an AGW fuse of any rating),
a 14 A SFE 14 fuse is 11⁄16 inch long,
a 20 A SFE 20 fuse is 11⁄4 inch long (same as an AGC fuse of any rating), and
a 30 A SFE 30 fuse is 17⁄16 inches long.
There are a number of lookalike fuses which can easily be confused with these. In general this type of fuse will have an "AG" label of some kind, which originally stood for "Automobile Glass".There are at least seven different sizes of fuses with a 1/4 inch diameter. The fuses listed are the most common for the size, which is always a fast-acting fuse:
1AG size, type AGA, 1 A to 30 A, 1/4 inch (6.3mm) diameter by 5⁄8 inch (15.9mm) long
2AG size, type AGB, 0.177" (4.5mm) diameter by 0.588" (14.9mm) long (frequently replaced with 5mm diameter by 15mm long international size fuse (aka 5 x 15mm - now more readily available)[9]
3AG size, type AGC, 0.125 A to 50 A, 1/4 inch diameter (6.3mm) by 11⁄4 inch (31.8mm) long
4AG size, type AGS, 9⁄32 inch (7.1mm) diameter by 11⁄4 inch (31.8mm) long
5AG size, type AGU, 1 A to 60 A, 13⁄32 inch (10.3mm) diameter by 11⁄2 inch (38.1mm) long.[6] Also called "Midget fuses."
7AG size, type AGW, 1 A to 30 A, 1/4 inch diameter (6.3mm) by 7⁄8 inch (22.2mm) long
8AG size, type AGX, 1 A to 30 A, 1/4 inch (6.3mm) diameter by 1 inch (25.4mm) long
9AG size, type AGY, 50 A, 1/4 inch (6.3mm) diameter by 17⁄16 inch (36.5mm) long
UK size, type UK, 35 A to 50 A, 1/4 inch (6.3mm) diameter by 11⁄4 inch (31.8mm) long
These and other fuses are still being manufactured for many applications, including for AC circuits and DC uses. Some are time delayed, slow reacting, or have leads for terminals used in circuits without a fuse holder. Many of the fuse dimensions and characteristics are published by the Society of Automotive Engineers as Standard SAE J 554.
Standard Package:
200pcs per bag, 2000pcs per box, 8000pcs per carton
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
- UL-standard no. 512.
Test Equipment
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
