3AG 6x30mm Clip PCB Mount Fuse Holder 250V Nickel Plated Brass

6x30 PCB Mount Fuse Holder 3AG Fuse Clip Nickel Plated Brass 6x32 6x30mm FS-600 Fuse Clip Holder

Product Description

The most used fuse clips for 6x30mm fuses

Widely used in household appliances, electric power, telecommunications, machine tools, ships, textiles, printing, mining machinery, Mustic instruments, etc.

Drawing

KEY WORDS: FUSE HOLDER. PCB FUSE HOLDER, FUSE CLIP

6x30 glass fuses

6x30 ceramic fuses

In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device; once a fuse has operated it is an open circuit, and must be replaced or rewired, depending on its type.

Fuses have been used as essential safety devices from the early days of electrical engineering. Today there are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity, and response times, depending on the application. The time and current operating characteristics of fuses are chosen to provide adequate protection without needless interruption. Wiring regulations usually define a maximum fuse current rating for particular circuits. Short circuits, overloading, mismatched loads, or device failure are the prime or some of the reasons for fuse operation. When a damaged live wire makes contact with a metal case that is connected to ground, a short circuit will form and the fuse will blow.

Standard Package:

2000pcs per bag, 50000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.