Item	Ceramic Fuse
Standard	UL or VDE
Blow Type	fast acting, slow blow
Body Material	glass
Leads Material	tinned copper
Cap Material	nickel plated brass
Voltage Rating	250V 125V
Current Rating	0.1A~20A
Mounting Type	axial leaded
Breaking Capacity	35A 100A 200A 10KA
Size	5.2x20 mm
Certifications	CUL UL VDE CCC
Applications	home appliance, power supply, telecommunication, consuming electronics

Product Features

Operation temperature	-55℃ To +125℃
Warranty Period	2 years
MPQ	500PCS
MOQ	2000PCS

Operating Temperature: -55℃ to +125℃ (Consider de-rating)

Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.

Recommended Soldering Parameters: Soldering pot temperature: 260℃ Max; Solder dwell time: 2∼5s

Resistance to Soldering Heat: 260℃, 10s. (Wave); 350℃, 5s. (Soldering iron)

Solderability: 260℃, ≤ 3s. (Wave); 350±10℃, ≤ 3s. (Soldering iron)

Blowing time

Fast blow

Time vs Current Characteristics: IEC 60127
Rated current	210%	275%
Blowing Time	<30min	10ms~2s

Time vs Current Characteristics:UL248-1/14
Rated current	100%	200%
Blowing Time	>4hs	<5s

Time delay

Time vs Current Characteristics: IEC 60127
Rated current	210%	275%
Blowing Time	<30min	750ms~80s

Time vs Current Characteristics:UL248-1/14
Rated current	100%	200%
Blowing Time	>4hs	<5s

TDS of FBC 5.2x20 glass fuse with pigtails

Breaking Capacity UL certified

Amps(A)	Volts(V)	Interrupting Rating(A)
0.2 - 0.25	125Vac	10000
0.3 - 2	125Vac	10000
2.5 - 10	125Vac	10000
0.2 - 0.25	250Vac	35
0.3 - 1	250Vac	35
1.25 - 2	250Vac	100
2.5 - 3.15	250Vac	100
4 - 10	250Vac	200

Popular Ratings:

Amp Code	Rated Current	Rated Voltage	Voltage Drop Max(mV)	Max.Power Dissipation(W)	Typical Cold Resistance (mΩ)	Nominal Melting I2t(A2sec)	Breaking Capacity	Approvals
								cURus	CQC	VDE	PSE	CCC

0250	250mA	125 V AC 250 V AC	1400	1.6	570	0.026	10KA/125V AC 100A/250V AC	●	○	○	○	○
0315	315mA		1300	1.6	860	0.109		●	○	●	○	●
0400	400mA		1200	1.6	540	0.240		●	○	○	○	●
0500	500mA		1000	1.6	220	0.168		●	○	●	○	●
0630	630mA		650	1.6	285	0.723		●	○	●	○	●
0800	800mA		240	1.6	120	0.757		●	○	●	○	●
1100	1.00A		200	1.6	101	1.64		●	○	●	●	●
1125	1.25A		200	1.6	65.0	2.56		●	○	●	●	●
1150	1.50A		190	1.6	51.47	3.76		●	○	○	○	○
1160	1.60A		190	1.6	50.35	4.00		●	○	●	●	●
1200	2.00A		170	1.6	40.65	5.76		●	○	●	●	●
1250	2.50A		170	1.6	30.00	9.61		●	○	●	●	●
1300	3.00A		150	2.5	25.00	13.9		●	○	○	○	○
1315	3.15A		150	2.5	24.00	20.7		●	○	●	●	●
1400	4.00A		130	2.5	17.60	22.1		●	○	●	●	●
1500	5.00A		130	2.5	13.50	41.0		●	○	●	●	●
1630	6.30A		130	2.5	10.60	70.6		●	○	●	●	●
1700	7.00A		130	2.5	9.48	106		●	○	○	○	○
1800	8.00A		130	4	7.50	164		●	●	●	●	○
2100	10.00A		130	4	6.30	272		●	●	●	●	○
2125	12.50A		100	6	3.80	702		○	●	○	○	○
2160	16.00A		100	6	3.10	1332		○	●	○	○	○

Note: (1) Permissible continuous operating current is 100% at ambient temperature of 23°C (73.4°F)

(2) The cURus certification by 125V and 250V; the VDE certification with 8A~10A by 125V and 250V; the others certification by 250V.

(3) The current values used for calculating I2T should be within the standard range of 8ms ~ 10ms.

Standard Package:

200pcs per bag, 2000pcs per box, 8000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

Will the fuse need to accessible for replacement?
How often will the fuse need to be replaced?
Should the end customer of the appliance have access to change the fuse?
Should the fuse only be accessible from outside the appliance?
How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
UL-standard no. 512.

Test Equipment

Company warehouse

FAQ

Q: Are you trading company or manufacturer ?

A: We are a fuse product factory.

Q: How long is your delivery time?

A: Generally it is 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: 100% in advance, T/T.

Product Tags: